OREANDA-NEWS It is reported that several crash tests were carried out during the inspection: frontal and side impacts, simulated rear-end collisions and collisions with a pole.

Another stage of testing is the static testing of the body and safety systems for durability. For example, safety belt fastenings are tested on a hydraulic bench with a total force of up to 9 tons for 2 seconds.

AvtoVAZ told about the production of the stylish Lada crossover
"According to the test results, the belts showed high strength under load exceeding the legal requirements of the R14 Regulations, and the belt attachment points demonstrated a minimal level of deformation," the press service of AvtoVAZ emphasized.

A static test of the strength of the body and the driver's door was also carried out at the stand: in slow motion, the loading cylinder is inserted into the interior by 46 mm, developing a force of up to 10 tons, and the low speed of its movement makes it possible to plot an accurate graph of deformation and structural changes in the power frame of the body element.

Earlier, the head of AvtoVAZ announced work on a hybrid version of Lada Azimut.